How to fix a Vacuum Cleaner With No Suction

As vacuum cleaners become increasingly popular, more and more people are finding them to be essential in their daily lives. These modern tools make it possible to get our work done with minimal effort and timeframes, making them valuable assets in today’s world.

There are some downsides to using a vacuum cleaner too. It may face different kinds of problems, resulting in no suction. That’s why, as a vacuum cleaner user, you need to know how to fix this problem.

This guide will show you how to fix your vacuum cleaner if it has lost suction. If you are experiencing this problem, follow the steps in this guide to get your vacuum working again.

Before moving into the core section, it is better to know the reason behind this problem. It will make your experience better.

How to fix a Vacuum Cleaner With No Suction

The Reasons Behind The No Suction Problem?

There can be a few reasons behind the no suction problem. Among them, the common reasons are:

  • Improper power setting system.
  • The dust bag/container is full.
  • Clogged or cracked hose pipe.
  • Damage or clogged filters.
  • broken vacuum belt
  • Brush or roller problems
  • Intake port backlog issue
  • air leakage in parts.

How to fix a Vacuum Cleaner With No Suction

Improper Power Setting System

You should start by checking your vacuum cleaner’s power setting. If the power setting is not good enough, it will offer little to no suction. Your vacuum cleaner power setting depends on the floor type and level of the job.

Your vacuum will need less power if the task is light. On the other hand, more power will be needed for a harder job. For instance, carpet cleaning will need the maximum power whereas, cleaning the floor will require less power. Besides, the type of job needs to be matched with your vacuum. 

If you own a modern vacuum, then you are supposed to find a switch/dial in your vacuum power setting. It will regulate your vacuum cleaner. All you need to do is adjust the power according to your task.

The Dust Bag/Container Is Full

Getting the dust bag or container full can be also a reason for losing the power of your vacuum cleaner. The duty of your vacuum is to collect the dust and put it into the bag. If the bag becomes full, then the vacuum will not get any space for gathering more dust. Therefore, your vacuum will stop collecting dust.

To get rid of this problem, you need to take off the dust bag. After removing it, you should make the bag empty and clean it properly. Then check the bag to find any scratches or cracks. 

Also, you need to check the joining connection between the bag and the vacuum cleaner to find if your vacuum contains any blockage. After that, you can reattach your bag. By doing this, you are supposed to get your vacuum cleaner working fine. 

Clogged Or Cracked Hose pipe

Your vacuum hose pipe is also an important factor. If there is any tear or leakage in your hosepipe, it can be the reason for losing your vacuum suction power. So, keep it in mind and give your hose pipe a quick check.

What if you find any leakage in your hosepipe? Well, in this case, replacing the hose pipe with a new one will be the best option. However, if you don’t want to replace the hose pipe, then you can fix it by yourself.

Damaged Or Clogged Filters

Your vacuum may hold several filters. The number of filters depends on the power and brand of your vacuum. So, you have to check your vacuum filter to ensure it is working fine or not.

The duty of your vacuum cleaner filter is filtering. That’s why there is a possibility of blockage because of its duty. You need to take off the filter and check it.

The modern vacuum cleaner filter can be washed and you can use it a few times after washing. You should wash your filter to remove the dust on it. After washing the filter, simply place the filter in its place and try to use your vacuum cleaner. 

Broken Vacuum Belt

If the vacuum belt gets jammed, clogged or damaged, it can be the reason for losing suction power. This problem mostly happens because of unwanted dust and debris. So, inspect the vacuum belt. If you find the belt is clogged, then you have to clean it.

Besides, also look for weak points or cracks in the belt as it also can be the reason for this problem. You should change the vacuum belt with a new one if you find it cracked.

Brushes Or Rollers Problems

You will find rotating brushes and rollers below your vacuum. Debris or sediments can get your rollers clogged. You need to check them well. Because it is another reason that can result in losing the suction power. Pay heed to this issue.

Intake Port Blockage Issue

You are supposed to find an intake port at your vacuum base. It can happen that your intake port may become clogged. All you have to do is inspect your vacuum intake port and ensure it is not holding any blockage.

In case you find the port is blocked, you can use the needle-nose pliers for reaching the clog. Take off the clog and give the functionality of your vacuum cleaner a quick check.

Air Leakage In Parts

As your vacuum cleaner needs to deal with air suction, it is a must that there is no air leakage. In this step, you need to find whether there is any air leakage or not in your vacuum. 

For this, you need to check the hose first that gathers the dust from the surface. The hose needs to be attached reliably with your vacuum. If there is any loose connection, then you should make it tight.

After that, give the dust container connection a quick check. You need to find the container connected well with your vacuum. If you find the connection is loose, you should work on it. Air leakage in this portion is acceptable. 

Leave a Comment