How To Sand A Door

If you want to get your home to look new, then repainting the doors and furniture is a good way. It is usual that the door and furniture of your home will start losing their beauty day by day. In this kind of case, you can repaint them.

However, you are supposed to know that you need to sand your door or furniture before painting it again. I noticed a lot of queries about how to sand a door in the forums. That’s why I have decided to talk about this matter.

In this guide, I will tell you how you can sand your door by yourself. So, let’s get started without making any delay.

Is It Possible To Sand My Door By Myself?

In short, yes. It is possible to sand your door by yourself. By sanding, you will be able to get rid of the older paint. Without it, the holes or scratches of your door will be removed after sanding. The process of sanding your door is also pretty straightforward. You just need to go through a few simple steps.

Steps To Follow For Sanding A Door:

Step 1: Bring The Essentials

Well, in the very first step of sanding your door, you need to bring the tools you will need for sanding your door. It is important to bring the right one for your job. The tools are:

  • Sandpaper
  • Newspaper
  • Sander
  • Ventilation
  • A Rag
  • Safety Gears (dust mask and safety glass)

Step 2: Get Your Door Prepared For Sanding

Once you have gathered the tools, you need to get your door prepared for sanding. For this, clean your door first. In order to clean your door, you will need to use soap and water. Using a piece of brush will be fine for removing the dirt on your door. Keep in mind that you should not overdo it.

After cleaning the dirt off your door, now take a piece of newspaper and lay them down around the door you are going to sand. Give it a check that you have properly covered your working space well. Otherwise, it will take a lot of time to clean the dust produced for sanding.

Also, wear the protective gears you have brought earlier for keeping yourself safe from the dust.

Step 3: Start The Sanding Process

This step is also known as the removal phase. In this step, you will be removing the bumps, scratches and holes of your door. You will remove the old painting as well.

Now, while going through the sanding process, you will have to deal with three types of sandpaper. They are the medium sandpaper, the find and the very fine sandpaper. The grit of those papers is also different. You will find 80-120 grit numbers in medium sandpaper and the fine and very fine sandpaper hold the 150-180 and 220-240 grit numbers respectively.

You should start with your medium sandpaper. So, take a piece of medium sandpaper and place the paper at the backside of your sander. Then start the sanding process. The medium sandpaper is mainly used for removing the previous paint and scratches. You need to sand until you find the older paint has vanished and the door is free from scratches. 

Also, you need to be careful that you are not applying so much pressure while sanding. In case your door has edges or holes, you need to manually sand them.

Step 4: Using The Fine Sandpaper For Sanding Your Door

Once you are done with sanding with the medium sandpaper, you may still find scratches on your door. You don’t need to worry about that. In this step, take a piece of fine sandpaper and place it on the backside of your sander. Then start sanding. You are supposed to find all scratches are removed after sanding with fine sandpaper.

You need to sand your whole door again as well. It is recommended to follow circular motions so that there is no existence of any marks. Also, you should never use your sander at full speed. You need to sand smoothly.

Step 5: Give Your Door A Finishing Touch

Well, you are in the last part of sanding. Here, you need to take a piece of very fine sandpaper, place it at the back of your sander and then start sanding. You need to sand the whole door. Make sure that you are sanding the door slowly and smoothly.

Actually, the very fine sandpaper is used for giving your door a final touch. This means, after sanding your door with very fine sandpaper at this stage, you will find your door is ready for painting.

Step 6: Cleaning The Door and Working Area

You don’t need to go through any sanding process in this step. All you need to do in this step is clean your door and workplace.

So, once you are done with sanding, remove the newspaper you have set earlier in your working place. In order to clean your working place well, you can take a rag and sweep your whole working area. After that, take some water in a bowl and mix it using soap. Then start washing your door using this mixture.

Leave a Comment