How to Use an Orbital Sander to Remove Paint

If you want to renovate your house or office, then removing the paint is one of the major tasks you need to go through. No doubt that your house or office will look more beautiful after removing the paints. In fact, it is a DIY hack that a lot of people follow.

However, removing the paint may seem to be a hassle to many people as they are not used to doing these kinds of tasks very often. It is always an easy task when you have an orbital sander. You will be able to remove all the paints easily using an orbital sander. 

Unfortunately, most people do not know how to use the sander for removing the paints. That’s why I am here.

In this guide, I will be talking about the detailed steps of using an orbital sander to remove the paints of your house.

How to use an orbital sander to remove Paint

Step 1: Follow the safety rules

Before getting started, you need to know and follow the safety rules. It is important to have a successful paint removing operation. As a part of your safety rules, you should wear a mask, earplugs and safety goggles for protecting yourself.

Besides, make sure that your working area is always clear. If there is anything in your working area, then it will disturb your work. Also, to ensure that your room is always clean, you can bring a vacuum cleaner.

Step 2:  Discovering the base 

In the next step, you need to find out the base materials under the paint. For this, you can use a sander. It is recommended not to use any chemical for removing the paint as there is a possibility to damage the drywall.

Using the orbital sander, it is possible to remove paint from your plain door frame, hardwood floor and metal surface. However, if there is a molded baseboard, then you have to pick the chemical paint in order to ensure the proper shape and design of your project.

Step 3: Preparing the surface

In this step, you need to prepare the surface and for this, you have to go through three essential steps. The steps are:

Cleaning the base: 

First, you should clean the surface in a good manner. Then rinse the surface and leave it to become dry. You can use dish detergent, grease cutting-cleaner for cleaning purposes.

Tapping the boundaries: 

After that, mark or border the surface for the removal of paint using the tape on its boundary. Thus, you will be working only on your selected area and it will cause no harm to the adjacent area. 

Applying the paint remover: 

Now, you need to apply the paint remover on the surface. So, apply the remover on your surface and wait a bit until you find the paint is dissolved.

Finally, you should wipe down the surface using a microfiber soft towel or paper towel. If you find there is any hard substance that has not dissolved after using the spray, then you can take the help of a paint scraper to get it off.

Step 4: Preparing environment before sanding

Well, you are almost ready to start sanding. Before you get started with sanding, there are a few things you need to do. First, you need to get the room empty. So, move all the decorations and furniture of that room. 

Then, open the windows and also use tape or cloths over the doorways. It will keep the dust inside the room and you will not have to worry about getting other rooms dirty.

Step 5: Start the sanding process

You are in the most crucial step of your job. So, while starting with the sanding process, you need to keep in mind that there is sandpaper of a variety of sizes. The grit sizing difference will determine your sanding job.

If there is a lower grit sander, then you will end up with poor sanding. On the other hand, if the grit number is higher, then you will have a fine sanding. That’s why you need to make sure that you have 60-grit, 80-grit and 150-grit sandpaper before you start sanding.

At first, you need to use the 60-grit sandpaper for covering the larger area in a short time period. Then use the 80-grit sandpaper and finally end up using the 150-grit sandpaper. Thus, you will be able to have a smooth surface.

Step 6:Finishing touch

Once you are done with sanding, now it’s time to give it a finishing touch. For this, use the vacuum cleaner to get all the dirt away. Then, you need to inspect your project surface properly. So, give it a quick check to find whether there is any damage or cracks. If you find any holes, then fill them before finishing using wood putty. 

After that, apply a pre-stain wood conditioner to help retain the color without looking stained. Also, prime your project surface for polishing or varnish.

After going through all the above-mentioned steps properly, you are supposed to be finished with removing paint using an orbital sander. However, if you have any curved surfaces for sanding, then the portable size orbital sander will do the best. You can use the orbital sander though.

On this site, there are some more guides on sanding which might be helpful to you. Some of them are listed below:

Leave a Comment