How To Use Orbital Sander

An orbital sander is an important tool for any DIY project. This sanding tool can be used on most materials, including wood floors, metal, and even laminate. However, this tool can’t be used in the wrong way on wood, metal, or other materials even if the tool seems easy to use.

So, how to use an orbital sander? The information will not only let you get a smooth surface but also ensure no dents for a close to flawless outlook. 

In this guide, we’ll talk about everything in detail so that you leave with no questions in your mind. Let’s Get Started!

How To Use Orbital Sander

How To Use Orbital Sander

Once all tools are prepared, insert the sanding disc and pad on the orbit sander while making sure there’s good ventilation in your working space. Then, turn it on after adjusting the variable speed and pressure level.

Using an orbital sander is a piece of cake if you follow the manual. Sadly, most users don’t find it clear and get confused during the process.

To break all the misperceptions, we have sorted the procedure into 5 steps so that you know how to use an orbital sander to remove the paint of a car, wall, wood, plastic, or metal stuff.

But before that, it’s better to note down the prep points which will help you to use the orbit sander in a better way. Are you ready?

Grab All The Equipment In Advance

Without tools, you can’t be prepared completely. To start the procedure, the tools will help you use the orbital sander better than ever. Be sure to gather all the mentioned items before moving to the following segment. 

  1. Safety goggles.
  2. Protective mask.
  3. A pair of gloves.
  4. Sanding disc or pad (60 – 240 grit).
  5. Orbital sander.

Cover The Sander With Sanding Disc Or Pad

You have 2 options to secure the sander using a disk which is a hook-and-loop or adhesive-backed system. And among all, the most popular option is the hook-and-loop disc.

Besides, you have to think of the grit of the sanding disc or pad. To select an ideal grit, pick one based on your working purpose.

  • 400+ grit of sanding discs would be ideal on metal materials.
  • Go with 180-grit sanding pads to sand down paint.
  • To fill gaps on wood material or touch-up projects, choose a 180-grit sanding disc.
  • Use 180 – 200 grit sanding pads for big projects with polishing large wood.

Based on your working style, try to grab a sanding pad or disc to attach to the orbital sander. That way you can use it to achieve a nice finish.

Pro Tip: Never use the sanding disc or pad so much so that it becomes clogged with debris.

Ensure Good Ventilation

Be sure to adjust the ventilation and dust extraction option to get rid of dust issues when using the orbital sander. Mostly, it should be enough to ensure a clean workstation.

Work With The Orbital Sander

Now, you can use the sander by plugging the cord on your preferred area to keep the surface level and clear. But, don’t over-use it on the material as it’ll cause damage or cracks. Instead, try to apply it for 30 seconds to 1 minute to see if it can bear this long.

After that, take a short break. Then again, use the sander on other spots for the same period. Plus, never hold the sander in one place continuously.

Follow the steps to use the sander for sanding purposes:

  • If the surface is hard and requires a long period to sand down, then be sure to use a lower grit sanding disc.
  • Next, change the sanding pad to 180-grit and then again use the sander for finishing.
  • Afterward, attach a 240-grit sanding pad to sand down the surface.

Keep The Pressure Low & Stable

You want to have full control over your hand by using no pressure additionally. But, be sure to change the speed settings if necessary. Plus, don’t forget to maintain the sander level. 

It’s a big topic that needs attention to avoid getting an uneven finish using the orbit sander. A nice hack to prevent pressure and maintain level is by checking its flow of it. Now, what’s that?

If you start the sander and see the flow before placing it on the material, it will help control the pressure while working over sleek material. 

Frequently Asked Questions

What is an orbital sander?
An orbital sander is a powerful tool that works with a strong motor. It operates in round motion while a sanding pad is attached to smoothen out the surface.

How does an orbital sander work?
While moving in a circular motion, it works via motor and other functions. Thanks to its rapid spins on the surface, the rust or skin gets sanded pretty easily.

Should I push down on the orbital sander?
No, don’t! It’s a bad thing to try which won’t benefit you at all. As the orbital sander already uses a lot of pressure, pushing it would cause taking out the skin faster by harming the surface.

Wrapping Up

Orbital sanders are very useful when it comes to shaping wood or lumber. With them, you can quickly create a refined edge or drill holes into your wood. However, it’s important to learn how to use an orbital sander, without the proper focus and a lot of patience, the results can be frustrating. 

So, next time you plan to do sanding projects, be sure to try this technique. Did it help you a little bit? We Hope So. 

Leave a Comment